[Lab] Network access for Laser

[Ryan Stec]

Thanks Janick! That would be great. We have a box of power supplies at Artengine. Email us directly with the power requirements and we can have a look.

We are going to be moving the work benches around in the other room so we may be able to set one up in M76 to accommodate some of the necessary accompanying tools and space. We will include this in the planning as we try to reorganize.

Cheers 

Ryan
---------
Sent from a mobile device.

> On Jan 5, 2015, at 12:37 PM, janick at bergeron.com wrote:
> 
> I have a Netgear WNR2000 I'm not using I can gladly donate and set-up... if I can find the power supply.
> 
> Having the ability to use one's laptop would indeed be great -- but that brings up the issue of work surface where it could be conveniently and safely set-up to work on.
> 
>  
> 
>  
>> On 2015-01-05 12:24, Ryan Stec wrote:
>> 
>> Hello Everyone,
>>  
>> Thanks to everyone for the work arounds on the laser in this confusing and troublesome troubleshooting.
>>  
>> In terms of network access to the laser cutter I agree that it is much more agreeable and productive work flow if you can send files directly from your laptop. 
>>  
>> There is no network access in the M76 room, but it seems that we could set up a wireless hub for the sole purpose of giving access to the laser cutter and this would allow any one interested in having direct access without having to rewire anything.
>>  
>> If someone is interested in setting up a router that the cutter can be accessed through please let us know. The installation of the necessary print driver is fairly easy on your personal computer, and all of the instruction are in the manual.
>>  
>> The laser will likely not be going out into the community any time soon, so any set up will remain intact for a while. 
>>  
>> The list of settings has also become quite long. If there is someone also interested in participating in a clean up of this that would be great.
>>  
>> Cheers,
>> Ryan
>> ___________________________
>>  
>> Ryan Stec
>> Artistic Director
>> Artengine
>> 2 Daly Ave.        Ottawa, ON
>> K1N 6E2          613.686.1941
>>  
>> 
>> _______________________________________________
>> Lab mailing list
>> 1. subscribe http://artengine.ca/mailman/listinfo/lab
>> 2. then email Lab at artengine.ca to send your message to the list
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://artengine.ca/pipermail/lab/attachments/20150105/607c70e5/attachment.html>