[Lab] Network access for Laser

[Richard Sloan]

here are at least 2 WRT54G in the lab now donated, they could be used also.

R.


On Mon, Jan 5, 2015 at 12:37 PM, <janick at bergeron.com> wrote:

>  I have a Netgear WNR2000 I'm not using I can gladly donate and set-up...
> if I can find the power supply.
>
> Having the ability to use one's laptop would indeed be great -- but that
> brings up the issue of work surface where it could be conveniently and
> safely set-up to work on.
>
>
>
>
> On 2015-01-05 12:24, Ryan Stec wrote:
>
> Hello Everyone,
>
> Thanks to everyone for the work arounds on the laser in this confusing and
> troublesome troubleshooting.
>
> In terms of network access to the laser cutter I agree that it is much
> more agreeable and productive work flow if you can send files directly from
> your laptop.
>
> There is no network access in the M76 room, but it seems that we could set
> up a wireless hub for the sole purpose of giving access to the laser cutter
> and this would allow any one interested in having direct access without
> having to rewire anything.
>
> If someone is interested in setting up a router that the cutter can be
> accessed through please let us know. The installation of the necessary
> print driver is fairly easy on your personal computer, and all of the
> instruction are in the manual.
>
> The laser will likely not be going out into the community any time soon,
> so any set up will remain intact for a while.
>
> The list of settings has also become quite long. If there is someone also
> interested in participating in a clean up of this that would be great.
>
> Cheers,
> Ryan
>   ___________________________
>
> Ryan Stec
> Artistic Director
> Artengine
> 2 Daly Ave.        Ottawa, ON
> K1N 6E2          613.686.1941
>
>
> _______________________________________________
> Lab mailing list
> 1. subscribe http://artengine.ca/mailman/listinfo/lab
> 2. then email Lab at artengine.ca to send your message to the list
>
>
> _______________________________________________
> Lab mailing list
> 1. subscribe http://artengine.ca/mailman/listinfo/lab
> 2. then email Lab at artengine.ca to send your message to the list
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://artengine.ca/pipermail/lab/attachments/20150105/81986135/attachment.html>