[Lab] cardboard and extension

[Henri Kuschkowitz]

Hi everyone,

Okay. Thanks for clearing that up. The reason why I asked is, that I was hoping for a way to possibly stash some materials as long as it wouldn’t take up more room in the lab. something perhaps to the side of one wall. I would be very much willing to contribute or take charge to build a cabinet or something to that extend where we could stash a few panels and such (Transporting bigger pieces on the bus is pretty complicated at times).

Best,
Henri



On Feb 16, 2014, at 9:36 PM, Britta Evans-Fenton <technical at artengine.ca> wrote:

> All lasering materials should be put in m76 laser cutting lab if kept at Artscourt and only as long as it is out of the way in the cubbies (minus the top right and bottom right one which are marked with tape) or along the wall next to it and out of the way.  I made an exception for Darcy because he was making the stars to fundraise efforts for the Philippians. Now that that is done, it should be removed and he said he was going to do so. 
> 
> Cheers,
> 
> Britta
> Technical Coordinator 
> Artengine.ca
> 
> 
> On Sun, Feb 16, 2014 at 2:50 PM, Darcy Whyte <darcy at inventorartist.com> wrote:
> Not sure we can stash stuff. I just diverted two loads of cardboard when I was working on the Parol project a while back and there's some leftover...
> 
> 
> 
> --
> Darcy Whyte
> 
> Art+ inventorArtist.com | Aviation rubber-power.com
> Contact: darcy at inventorArtist.com | 613-563-3634 by appointment (no text)
> 
> 
> 
> On Sat, Feb 15, 2014 at 3:24 PM, Henri Kuschkowitz <henri.kuschkowitz at gmail.com> wrote:
> I wasn’t aware that we were allowed to stash our material? 
> 
> Britta, can we do that now?
> 
> 
> Cheers,
> Henri
> 
> On Feb 15, 2014, at 3:08 PM, Darcy Whyte <darcy at inventorArtist.com> wrote:
> 
>> I just noticed my little stash of cardboard in the corner was moved around. Did somebody need access to that wall or need some? Either way, let me know so when I organize it back to being neat, I don't put it in the way of anybody's requirements.That will get moved to my West End lab as it was for a couple of project but it's now needed out there for Squirrel boxes. So it'll be gone soon.
>> 
>> Does anybody mind if I grab an extension cord from the lab and use it tonight? I should have it back tonight or in the morning.
>> 
>> 
>> --
>> Darcy Whyte
>> 
>> Art+ inventorArtist.com | Aviation rubber-power.com
>> Contact: darcy at inventorArtist.com | 613-563-3634 by appointment (no text)
>> 
>> _______________________________________________
>> Lab mailing list
>> 1. subscribe http://artengine.ca/mailman/listinfo/lab
>> 2. then email Lab at artengine.ca to send your message to the list
> 
> 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://artengine.ca/pipermail/lab/attachments/20140217/0383be4f/attachment.html>