[Lab] laser status

[Richard Sloan]

I too saw the problem last night it seems very confused, does not behave at
all seems to me to be some form of hardware failure at this point.
On 2014-08-21 10:14 AM, "Britta Evans-Fenton" <technical at artengine.ca>
wrote:

> I used the cutter last week with no problem, but someone had reported an
> issue a few days earlier. I'm going into the lab to play with it in a
> moment.
>
> On Thursday, August 21, 2014, Darcy Whyte <darcy at inventorartist.com>
> wrote:
>
>> Okay, so the problem is not new. Anybody else notice anything?
>>
>> I suppose the next thing to do is get the manufacturer support on the
>> line and see if they have anything in their help database on it.
>>
>> Last night when a bunch of people were all around it the firmware was
>> reflashed but that didn't seem to affect the problem.
>>
>>
>>
>> --
>> Darcy Whyte
>>
>> Art+ inventorArtist.com <http://inventorartist.com/> | Aviation
>> rubber-power.com
>> Contact: darcy at inventorArtist.com | 613-563-3634 by appointment (no text)
>>
>>
>>
>> On Thu, Aug 21, 2014 at 10:03 AM, Andrew Szeto <andrew.szeto at outlook.com>
>> wrote:
>>
>>> Hey Darcy,
>>>
>>> I noticed what you were describing last week when I used it. First time
>>> it's happened to me. It would re-position itself after I had it placed (xy
>>> off) and hit the "Go" button for the first time (*second time is when it
>>> actually started its cuts). My work around was to then re-adjust my project
>>> to where the machine had re-positioned itself to. I generally start my cuts
>>> from left-center, so it wasn't too much of an ordeal. It's not ideal, but
>>> it worked out alright. Sorry I didn't report this earlier. I didn't perform
>>> any actions that were out of the ordinary (to my knowledge anyhow), so I
>>> don't think I prompted it to act that way. Hopefully we can get this
>>> resolved. Here to help in any way possible.
>>>
>>> Cheers,
>>> Andrew
>>>
>>>
>>>
>>>
>>> ------------------------------
>>> From: darcy at inventorArtist.com
>>> Date: Thu, 21 Aug 2014 09:56:00 -0400
>>> To: lab at artengine.ca
>>> Subject: [Lab] laser status
>>>
>>>
>>> I noticed last night when I was called to help with the laser that it's
>>> acting out. Just after setting home it is going through some routine moving
>>> the head around and then arriving back near home.
>>>
>>> Did this problem just occur last night? It is helpful if people come
>>> forward when problems are noticed so anybody investigating can know the
>>> entire history of the problem. For instance if there was any attempts at
>>> resolving a problems, what was it and what was the outcome. What was going
>>> on when the problem occurred and so forth.
>>>
>>> What is the status of the machine now? Is it working?
>>>
>>>
>>> --
>>> Darcy Whyte
>>>
>>> Art+ inventorArtist.com <http://inventorartist.com/> | Aviation
>>> rubber-power.com
>>> Contact: darcy at inventorArtist.com | 613-563-3634 by appointment (no
>>> text)
>>>
>>>
>>> _______________________________________________ Lab mailing list 1.
>>> subscribe http://artengine.ca/mailman/listinfo/lab 2. then email
>>> Lab at artengine.ca to send your message to the list
>>>
>>
>>
>
> --
> Britta
> *Technical Coordinator *
> Artengine.ca
>
>
> _______________________________________________
> Lab mailing list
> 1. subscribe http://artengine.ca/mailman/listinfo/lab
> 2. then email Lab at artengine.ca to send your message to the list
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://artengine.ca/pipermail/lab/attachments/20140821/67b6e85c/attachment.html>