[Lab] CHALLENGE: Hack
Justin
justin at slootsky.org
Wed Aug 17 14:14:46 EDT 2016
I have large size plotter waste paper that I keep, primarily for wrapping
gifts...
On August 17, 2016 1:49:24 PM Jason Cobill <jason.cobill at gmail.com> wrote:
> So there's this origami jet-fighter that I like making for friends that
> looks pretty cool. It only barely flies, but usually I draw all over the
> final result and it makes up for it's weaksauce aerodynamics with it's
> sharp looks.
>
> I thought today I'd hack its size!
>
>
>
> You can make your own by following these instructions. Like all origami
> instructions, there's one step that's super confusing. If you have any
> trouble with Step 14 send me a note and I can show you how in a bunch of
> photos.
> Also note: the original design calls for A4 european paper - the end
> result of using 8.5x11 is that the tail's a bit stubbier and the wings are
> a bit narrower... if you're patient you can cut your paper to Euro
> proportions before you begin but it's not really necessary.
>
>
> http://origamiyard.s3-website-us-east-1.amazonaws.com/uploads/origami/diagram/8/f15.pdf
>
> So - my first test on some newsprint (a Metro) turned out a bit floppy,
> so I ran down to the university bookstore and bought some cool black
> bristol board.
>
>
>
> It cost me $1.35 because I was too lazy to go to the Dollar store around
> the corner. :)
>
>
>
> The first few folds were easy, and I used a handy plastic object to
> flatten down the edges. (They shut off the AC early in the summer... I
> always have an extra deodorant in my cupboard)
> It already looks like a stealth bomber. :) DONE! :)
>
>
>
> Subsequent folds were getting stiffer. Here parts of the plane are
> 6-sheets deep and I've switched to a new tool, a PHP reference book. :)
>
>
>
> Okay, now parts of the plane are 12 sheets deep, and I'm having a
> challenging time folding - I take out my BIG PHP book and start hammering
> down edges. If I were at home, this is the point I'd bring out wood clamps.
>
>
>
> The last few folds are fairly straightforward, but it's really difficult
> to get the rounding out of the corners - I found some binder clips that I'm
> using to hold the seams until I can really clamp it down later with a vise.
>
>
> *Lessons learned:*
> It would have been really helpful to pre-score the sheet - the plane
> gets so thick that it feels like bending a phone book. :) I'll run my next
> one over with a ruler and a scoring tool.
> Definitely need some clamps at certain stages to make it behave. I'm
> going to try making a wooden rig for clamping down between steps.
> A sheet of bristol board doesn't really feel that big once it's folded
> down. I had hoped it would be more impressive. Time to call a printing
> company to see if I can get a HUGE ream of paper! The final result is
> almost 2 feet long, so it's definitely a huge paper plane... I just had
> visions of leaping out the window with it and gliding to Rio. ;) Not
> today...
> It mysteriously smells like the underarms of an ocean surfer. :) Or at
> least a PHP developer who surfs the web. :)
>
> -Jason Cobill
>
>
> On Wed, Aug 17, 2016 at 10:45 AM, Jason Cobill <jason.cobill at gmail.com>
> wrote:
>
>>
>> *I CHALLENGE YOU!*
>>
>> 1) Make a paper airplane
>> 2) Do something weird to it
>> 3) Post your results
>>
>> Work in progress shots are encouraged. Anything is allowed.
>> I want to see some lateral thinking! :)
>>
>> Before you ask: Yes, you have total flexibility on the definition of
>> "paper" and "airplane". :) Plasticine dirigibles and spaghetti helicopters
>> - surprise us.
>>
>> -Jason Cobill
>>
>
>
>
> ----------
> _______________________________________________
> Lab mailing list
> 1. subscribe http://artengine.ca/mailman/listinfo/lab
> 2. then email Lab at artengine.ca to send your message to the list
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://artengine.ca/pipermail/lab/attachments/20160817/e53da3e6/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PAP2.jpg
Type: image/jpeg
Size: 54309 bytes
Desc: not available
URL: <http://artengine.ca/pipermail/lab/attachments/20160817/e53da3e6/attachment-0006.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PAP3.jpg
Type: image/jpeg
Size: 51874 bytes
Desc: not available
URL: <http://artengine.ca/pipermail/lab/attachments/20160817/e53da3e6/attachment-0007.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PAP4.jpg
Type: image/jpeg
Size: 55053 bytes
Desc: not available
URL: <http://artengine.ca/pipermail/lab/attachments/20160817/e53da3e6/attachment-0008.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PAP1.jpg
Type: image/jpeg
Size: 39213 bytes
Desc: not available
URL: <http://artengine.ca/pipermail/lab/attachments/20160817/e53da3e6/attachment-0009.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PAP5.jpg
Type: image/jpeg
Size: 45237 bytes
Desc: not available
URL: <http://artengine.ca/pipermail/lab/attachments/20160817/e53da3e6/attachment-0010.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PAP_Example.jpg
Type: image/jpeg
Size: 18787 bytes
Desc: not available
URL: <http://artengine.ca/pipermail/lab/attachments/20160817/e53da3e6/attachment-0011.jpg>
More information about the Lab
mailing list