[Lab] Price for PCB

[Joseph Michael Sleiman]

I used smart prototyping and I was really satisfied.

I would only use them if you intend to get them to place the components for
you. They charge per leg, but the price is cheaper than others.

Cheers,
Joseph

On Sun, Oct 18, 2015 at 10:32 AM, Matthew Bells <matt at mbells.ca> wrote:

> I know several who use OSHPark and are happy. If you want more than one or
> two, then consider DirtyPCB. They’ll do 9-12 for the price of 5. Both have
> decent and simple pricing model. I think in both cases that you pay for the
> whole square inch (so if you use only half of it, you should see if you can
> put a second copy within the footprint).
>
>
>
> Also note that these companies do not QA your designs. You get exactly
> what you ask for. If you haven’t done board design before, then you may
> want to go with a pricier higher service company. One of the guys had to
> drill 2 rings in 500 boards (learn-to-solder kits) because he didn’t
> realize the backplane would short out the part. See
> http://www.makerexpo.ca/2015/09/learn-to-solder/ for details…
>
>
>
> -Matt
>
>
>
> *From:* Lab [mailto:lab-bounces at artengine.ca] *On Behalf Of *Wesley Ellis
> *Sent:* 2015.October.17 18:36
> *To:* Bruce
> *Cc:* lab
> *Subject:* Re: [Lab] Price for PCB
>
>
>
> I've only ever made one board, but I used OSHPark for it (
> http://oshpark.com/) and it worked out pretty well. Pricing depends on
> the total area of the board, which is set at $5 per square inch
>
>
> Wesley Ellis
> http://about.tahnok.me
>
>
>
> On Sat, Oct 17, 2015 at 3:59 PM, Bruce <lists at faintfuzzies.ca> wrote:
>
> I'm looking to have this:
>
>
>
> http://arduinoexplained.blogspot.ca/2012/12/dew-controllerhardware.html
>
>
>
> turned in to a PCB. Where should I go and any idea of a price?
>
>
>
> ====
>
> bruce
>
>
> _______________________________________________
> Lab mailing list
> 1. subscribe http://artengine.ca/mailman/listinfo/lab
> 2. then email Lab at artengine.ca to send your message to the list
>
>
>
> _______________________________________________
> Lab mailing list
> 1. subscribe http://artengine.ca/mailman/listinfo/lab
> 2. then email Lab at artengine.ca to send your message to the list
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://artengine.ca/pipermail/lab/attachments/20151018/d01e683b/attachment.html>