[Lab] Cutting MDF on a laser cutter

[HC613]

I use 1/8 inch Masonite hardboards, and it works quite well. (Sample
attached)

Rona sells giant pieces of hardboards, which they can cut for you for a
small fee.

I still have some of these hardboards lying around, cutted to a managable
size. If you want, I can sell some at cost.



​

On Tue, Nov 3, 2015 at 2:02 PM, Joseph Michael Sleiman <jslei033 at uottawa.ca>
wrote:

> Hey guys,
>
> I know a lot of you cut MDF regularly with laser cutters. What's the
> maximum thickness they can go through? Where have you been finding the
> sheets? Most of the stuff at the box stores appears too thick, and Epilog's
> site doesn't seem to yield any answers...
>
> I know it varies, but I'm sure there's a ballpark?
>
> Cheers,
> Joseph
>
> _______________________________________________
> Lab mailing list
> 1. subscribe http://artengine.ca/mailman/listinfo/lab
> 2. then email Lab at artengine.ca to send your message to the list
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://artengine.ca/pipermail/lab/attachments/20151103/537f29af/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20151012_110542_HDR.jpg
Type: image/jpeg
Size: 1693068 bytes
Desc: not available
URL: <http://artengine.ca/pipermail/lab/attachments/20151103/537f29af/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20151012_110505_HDR.jpg
Type: image/jpeg
Size: 2216466 bytes
Desc: not available
URL: <http://artengine.ca/pipermail/lab/attachments/20151103/537f29af/attachment-0003.jpg>