[Lab] Acrylic

[Joseph Michael Sleiman]

I've also had decent luck with Canus. Not super expensive but they're also
able to cut down the original sized pieces (don't have to buy an entire 8x4
or tube or whatever).

On Fri, Jun 26, 2015 at 7:59 PM, Phonesavanh <ps at agoralab.ca> wrote:

> Hi Henri, Dave and Wesley,
>
> Thank you for all the answers!
> Will check that next week.
>
> Have a nice week-end!
>
> Phonesavanh
>
>
> On 2015-06-26, at 19:51, Wesley Ellis <tahnok at gmail.com> wrote:
>
> I used laird plastics and it was pretty good, although in order to get the
> colour I wanted I needed to buy an entire 8' x 4' sheet!
>
> There's also Advanced Plastics of Ottawa and Canus
>
> Wesley Ellis
> http://about.tahnok.me
>
> On Fri, Jun 26, 2015 at 10:34 AM, Dave Hunt <dave at huntgang.com> wrote:
>
>> I've gone to Laird Plastics accross from the Train Yards a few times.
>> http://www.lairdplastics.ca/
>>
>>
>>
>> On Fri, Jun 26, 2015 at 9:41 AM, Matthew Bells <matt at mbells.ca> wrote:
>>
>>> If you are less picky about size, I’ve often seen off-cuts with the
>>> protective plastic still on at surplus stores.
>>>
>>>
>>>
>>> *From:* Lab [mailto:lab-bounces at artengine.ca] *On Behalf Of *Henri
>>> Kuschkowitz
>>> *Sent:* 2015.June.26 00:41
>>> *To:* lab; Phonesavanh Thongsouksanoumane
>>> *Subject:* Re: [Lab] Acrylic
>>>
>>>
>>>
>>> Sabic plastic's the place to go. They are the supplier of all local
>>> distributors.
>>>
>>> Cheers,
>>>
>>> Henri Kuschkowitz
>>>
>>>
>>>
>>>
>>>
>>> On Thu, Jun 25, 2015 at 9:37 PM -0700, "Phonesavanh Thongsouksanoumane" <
>>> ps at agoralab.ca> wrote:
>>>
>>> Hi all,
>>>
>>>
>>>
>>> May one of you know where to find Acrylic Sheet 1/4 inch to 1inch thick,
>>> that is good quality for the price in Ottawa and Montreal?
>>>
>>>
>>>
>>> Thank you!
>>>
>>>
>>>
>>> Phon
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Lab mailing list
>>> 1. subscribe http://artengine.ca/mailman/listinfo/lab
>>> 2. then email Lab at artengine.ca to send your message to the list
>>>
>>
>>
>> _______________________________________________
>> Lab mailing list
>> 1. subscribe http://artengine.ca/mailman/listinfo/lab
>> 2. then email Lab at artengine.ca to send your message to the list
>>
>
> _______________________________________________
> Lab mailing list
> 1. subscribe http://artengine.ca/mailman/listinfo/lab
> 2. then email Lab at artengine.ca to send your message to the list
>
> _______________________________________________
> Lab mailing list
> 1. subscribe http://artengine.ca/mailman/listinfo/lab
> 2. then email Lab at artengine.ca to send your message to the list
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://artengine.ca/pipermail/lab/attachments/20150627/9c377544/attachment.html>