[Lab] Any ideas what these parts are called on Digi-Key

[John Doe]

Finding stuff on Digikey is much easier with the Advanced Search
greasemonkey script.

https://eewiki.net/display/Motley/advancedsearch+Greasemonkey+Userscript+for+Digikey.com

On Tue, Jan 20, 2015 at 12:20 PM, Adrian Jones <adrian at woodsgood.ca> wrote:

> Megan,
> I'm not sure if this will help but for problems that involve specialized
> connectors, I have often resorted to making my own.
>
> I use 20cm - 50cm lengths of Female To Female jumper cables (like this
>
> http://www.ebay.ca/itm/40PCS-Dupont-wire-jumper-cables-20cm-2-54MM-male-to-f
> emale-For-Arduino-/171422500152?pt=LH_DefaultDomain_0&hash=item27e993c538)
> which come on a 40-way 0.1" ribbon cable.
>
> Choosing the right starting colour (0 black, 1 brown, 2 red etc.) , I tear
> off and attach the appropriate number of cables onto the connector. I
> smear
> a drop of superglue across the female sockets (it wicks into the gaps
> between them) and this glues the entire female connector assembly together.
> Et voila! This works for any number of conductors and for both single and
> dual in line connectors (great for connecting to an ESP8266).
> Hope that this helps.
>
> Many thanks,
>
> .... Adrian
>
>
> _______________________________________________
> Lab mailing list
> 1. subscribe http://artengine.ca/mailman/listinfo/lab
> 2. then email Lab at artengine.ca to send your message to the list
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://artengine.ca/pipermail/lab/attachments/20150120/e720c462/attachment.html>