[Lab] rastering with laser

[janick at bergeron.com]

Here are my notes (and result) from my latest project: 

Settings 

Color 

Thickness 

Job 

Power 

Speed 

Freq 

DPI 

Notes 

Clear 

3mm 

Cutting 

100% 

45% 

5000 

Engraving 

50% 

50% 

500 

Out of focus by +1/16 inch (+1.6 mm) 

The darkness of the filled element will affect the rastering result. The
attached photo is from the setting above, using a 0/0/0/50 fill color. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://artengine.ca/pipermail/lab/attachments/20141008/333812d7/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 10653675_763990500305769_6457720656452693583_n.jpg
Type: image/jpeg
Size: 64672 bytes
Desc: not available
URL: <http://artengine.ca/pipermail/lab/attachments/20141008/333812d7/attachment-0001.jpg>