[Lab] Replies to digests [was: Re: Lab Digest, Vol 35, Issue 13]
Richard Guy Briggs
rgb at tricolour.net
Fri Jan 25 14:08:35 EST 2013
On Fri, Jan 25, 2013 at 12:40:37PM -0500, Joshua Mark wrote:
> I don't think I quite have this lab mail list reply thing down yet. Should
> I CC lab at artengine.ca for each reply I want to be a part of the thread?
It would be better if you didn't use the digest, so that when you reply, we
wouldn't be staring at an unhelpful subject line. Either that, or please trim
heavily and copy the subject line for the specific posting to which you are
replying into the subject line of your reply. There isn't really that much
traffic on this list.
> Upon more thought, I've come up with 2 variations on a theme. One would use
> the fancy accurate 3D printer to build a component scaffold to hold the
> balanced armature drivers, the 3 way passive crossover and any other guts
> of the in-ear monitor. This would then be dropped into the gel mold just
> after pouring the flexible silicone and just before pouring the acrylic
> (see this <http://engt.co/UqkMa7> for context). The scaffold would be
> printed with ABS and wax such that after the acrylic is set, the device
> could be heated, and the wax would pour out the ear canal, opening
> the channel to each driver. It's complicated and heating the device might
> damage it. However, if it works, it removes a lot of finicky work getting
> the components into the acrylic cast.
>
> The second is much easier. Build a model for a normal ear bud with space
> for the drivers and components. Print it in 2 "mate-able" pieces. Insert
> the components and just glue them together. Then use a normal ear bud tip
> or do the Collin's Lab gooey ear kit thing. This is *so* much easier and
> should have similar results.
>
> Thoughts? Thanks for the input guys!
>
> On Fri, Jan 25, 2013 at 12:00 PM, <lab-request at artengine.ca> wrote:
>
> > Send Lab mailing list submissions to
> > lab at artengine.ca
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> > http://artengine.ca/mailman/listinfo/lab
> > or, via email, send a message with subject or body 'help' to
> > lab-request at artengine.ca
> >
> > You can reach the person managing the list at
> > lab-owner at artengine.ca
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of Lab digest..."
> >
> >
> > Today's Topics:
> >
> > 1. Re: In-ear monitor clone with 3D printer (Matthew Bells)
> > 2. Re: In-ear monitor clone with 3D printer (nfk)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Thu, 24 Jan 2013 23:37:17 -0500
> > From: "Matthew Bells" <matt at mbells.ca>
> > Subject: Re: [Lab] In-ear monitor clone with 3D printer
> > To: "'Joshua Mark'" <joshuajmark at gmail.com>, <lab at artengine.ca>
> > Message-ID: <02d801cdfab5$a85527b0$f8ff7710$@mbells.ca>
> > Content-Type: text/plain; charset="us-ascii"
> >
> >
> >
> > You might want to check out this DIY earbuds:
> > http://blog.makezine.com/2010/08/25/collins-lab-custom-fit-earbuds/
> >
> >
> >
> > I'm not sure how you would use a 3D printer. you would need to make a very
> > good scan to replicate it.
> >
> >
> >
> > From: lab-bounces at artengine.ca [mailto:lab-bounces at artengine.ca] On Behalf
> > Of Joshua Mark
> > Sent: 2013.January.23 11:16
> > To: lab at artengine.ca
> > Subject: [Lab] In-ear monitor clone with 3D printer
> >
> >
> >
> > Hi All,
> >
> >
> >
> > A few years ago I was doing research into how to make my own Westone ES-5
> > in-ear monitor clones. They're $1000 and custom fit. It has 5 drivers but
> > components are still under $100. It dawned on me this morning how much
> > easier the process could be with an accurate 3D printer.
> >
> >
> >
> > Is there any interest in investigating this? There's an factory tour here:
> >
> > http://www.engadget.com/2011/08/09/westone-lab-tour-how-in-ear-monitors-are-
> > made-from-impressions/
> >
> >
> >
> > Cheers,
> >
> > Joshua
> >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> > http://artengine.ca/pipermail/lab/attachments/20130124/4d1fd72a/attachment.html
> > >
> >
> > ------------------------------
> >
> > Message: 2
> > Date: Thu, 24 Jan 2013 23:42:08 -0500
> > From: nfk <edgecity at rogers.com>
> > Subject: Re: [Lab] In-ear monitor clone with 3D printer
> > To: "Matthew Bells" <matt at mbells.ca>
> > Cc: 'Joshua Mark' <joshuajmark at gmail.com>, lab at artengine.ca
> > Message-ID: <D5C5E006-34A3-4178-9616-827CCE842FF5 at rogers.com>
> > Content-Type: text/plain; charset="windows-1252"
> >
> > check out Cyberware. they have been doing custom hearing devices since 2000
> >
> > On 2013-01-24, at 11:37 PM, Matthew Bells wrote:
> >
> > >
> > > You might want to check out this DIY earbuds:
> > http://blog.makezine.com/2010/08/25/collins-lab-custom-fit-earbuds/
> > >
> > > I?m not sure how you would use a 3D printer? you would need to make a
> > very good scan to replicate it.
> > >
> > > From: lab-bounces at artengine.ca [mailto:lab-bounces at artengine.ca] On
> > Behalf Of Joshua Mark
> > > Sent: 2013.January.23 11:16
> > > To: lab at artengine.ca
> > > Subject: [Lab] In-ear monitor clone with 3D printer
> > >
> > > Hi All,
> > >
> > > A few years ago I was doing research into how to make my own Westone
> > ES-5 in-ear monitor clones. They're $1000 and custom fit. It has 5 drivers
> > but components are still under $100. It dawned on me this morning how much
> > easier the process could be with an accurate 3D printer.
> > >
> > > Is there any interest in investigating this? There's an factory tour
> > here:
> > http://www.engadget.com/2011/08/09/westone-lab-tour-how-in-ear-monitors-are-made-from-impressions/
> > >
> > > Cheers,
> > > Joshua
> > > _______________________________________________
> > > Lab mailing list
> > > Lab at artengine.ca
> > > http://artengine.ca/mailman/listinfo/lab
> >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> > http://artengine.ca/pipermail/lab/attachments/20130124/0720f9c1/attachment-0001.htm
> > >
> >
> > ------------------------------
> >
> > _______________________________________________
> > Lab mailing list
> > Lab at artengine.ca
> > http://artengine.ca/mailman/listinfo/lab
> >
> >
> > End of Lab Digest, Vol 35, Issue 13
> > ***********************************
> >
> _______________________________________________
> Lab mailing list
> Lab at artengine.ca
> http://artengine.ca/mailman/listinfo/lab
slainte mhath, RGB
--
Richard Guy Briggs -- ~\ -- ~\ <hpv.tricolour.net>
<www.TriColour.net> -- \___ o \@ @ Ride yer bike!
Ottawa, ON, CANADA -- Lo_>__M__\\/\%__\\/\%
Vote! -- <greenparty.ca>_____GTVS6#790__(*)__(*)________(*)(*)_________________
More information about the Lab
mailing list