[Lab] Electronics help

Andrew Plumb andrew at plumb.org
Wed Sep 12 12:32:17 EDT 2012


Now that I'm at my laptop, here's their post with more details:

http://www.evilmadscientist.com/2012/artcontroller/

The name is in/from the origins.

Andrew.

On 2012-09-12, at 12:25 PM, Andrew O'Malley wrote:

> Interesting, but I'm not so sure about the name . . . kind of
> oversimplifies the notion of "interactive art" imo.
> 
> Just my opinion, though; don't get me wrong, I'm a big EMSL fan . . .
> 
> 
> On Wed, Sep 12, 2012 at 12:04 PM, Andrew Plumb <aplumb at gmail.com> wrote:
>> EMSL just yesterday released their Art Controller Kit, which may be perfect for this sort of application:
>> 
>> http://evilmadscience.com/productsmenu/tinykitlist/580
>> 
>> Andrew
>> 
>> Sent from my iPhone
>> 
>> On 2012-09-12, at 10:19 AM, "Andrew O'Malley" <aomalley at gmail.com> wrote:
>> 
>>> Agreed that you are going to need to user relays to trigger your
>>> valves and pumps.  Going with a dedicated Arduino shield as suggested
>>> is probably the easiest approach if you are unfamiliar with
>>> electronics, though setting up the circuit is quite simple if you are
>>> comfortable reading schematics and datasheets.
>>> 
>>> Cheers,
>>> ao.
>>> 
>>> 
>>>> Message: 4
>>>> Date: Wed, 12 Sep 2012 07:09:30 -0700
>>>> From: Chris De Groot <cdegroot at adobe.com>
>>>> Subject: Re: [Lab] Electronics help
>>>> To: Adam Hill <theadbo+modlab at gmail.com>, Toby Murray
>>>>       <murray.toby at gmail.com>
>>>> Cc: "Lab at artengine.ca" <Lab at artengine.ca>
>>>> Message-ID:
>>>>       <686848D3189C0845A6E5FA781D6A0FFF36F699F0EF at nambx03.corp.adobe.com>
>>>> Content-Type: text/plain; charset="us-ascii"
>>>> 
>>>> I would have a look at one of these from Robotshop.
>>>> 
>>>> http://www.robotshop.com/ca/productinfo.aspx?pc=RB-Dfr-170&lang=en-US
>>>> http://www.robotshop.com/ca/productinfo.aspx?pc=RB-See-102&lang=en-US
>>>> 
>>>> They are pretty inexpensive, and ready to go, they have a reasonable design to ensure it is a little harder to fry your arduino or computer (opto isolation etc). This means you are right back at being able to focus on software and creativity that way.
>>>> 
>>>> You could not buy the parts for the price they sell and ship the shields for I recon. The only limitation is that the use of relays means something is either on or off. Which I think is fine for solenoids and small pumps. You can switch a very wide range of voltages and powers including the 12v for most solenoids to even some mains, though I suggest you avoid using mains if you are not yet experienced in safety precautions in developing with voltages that can hurt.
>>>> 
>>>> Cheers C.
>>>> 
>>>> 
>>>> 
>>>> From: lab-bounces at artengine.ca [mailto:lab-bounces at artengine.ca] On Behalf Of Adam Hill
>>>> Sent: Wednesday, September 12, 2012 9:17 AM
>>>> To: Toby Murray
>>>> Cc: Lab at artengine.ca
>>>> Subject: Re: [Lab] Electronics help
>>>> 
>>>> Hey Toby,
>>>> 
>>>> posting the model numbers of the valve's and pump would help to get specific help. In the meantime, this thread<http://arduino.cc/forum/index.php/topic,10845.0.html> has some good guides in it.
>>>> 
>>>> Good luck,
>>>> -a
>>>> 
>>>> On Wed, Sep 12, 2012 at 12:32 AM, Toby Murray <murray.toby at gmail.com<mailto:murray.toby at gmail.com>> wrote:
>>>> Hey everyone,
>>>> 
>>>> I new here and dropped by the ModLab last week just to poke around, and it seems like a pretty cool place. I have a rather large project in mind and I've run into some difficulties with my complete lack of hardware/electronics knowledge. To that end, I was wondering if anyone had some free time/brain space to help me plan things out and give general guidance.
>>>> 
>>>> I have a rudimentary understanding of the Arduino environment from the software side, I don't see any problems there, and an almost non-existent understanding from the hardware side. With that in mind, I'm looking to control some water. I already have an Arduino, a tank, two solenoid valves, and a couple pumps to play with. My issues revolve around upping both the current and the voltage of the Arduino to be able to toggle the solenoids/contactor of appropriate size for the pumps (if this is even the proper way to do it? Went to Active Components and they had nothing that I thought I needed, which made me second guess myself). I think I've come up with a possible solution from mixing and matching specs I find on the internet, but seeing as I've almost no idea what I'm doing I'd like to go over it with someone who's done this kind of stuff before. Especially before I go buying random extremely specific components...
>>>> 
>>>> To that end, I'm putting out this call for help. Anybody feel like jumping in on this? Doesn't have to be in person; email, instant message, texts, phone -  it all works.
>>>> 
>>>> Any help is appreciated!
>>>>   - Toby Murray
>>>> 
>>> 
>>> _______________________________________________
>>> Lab mailing list
>>> Lab at artengine.ca
>>> http://artengine.ca/mailman/listinfo/lab
> 
> _______________________________________________
> Lab mailing list
> Lab at artengine.ca
> http://artengine.ca/mailman/listinfo/lab

--

"The future is already here.  It's just not very evenly distributed" -- William Gibson

Me: http://clothbot.com/wiki/



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://artengine.ca/pipermail/lab/attachments/20120912/b391e7fa/attachment-0001.htm>


More information about the Lab mailing list