[Lab] Need help Identifying a part

Tue Jun 28 13:54:10 EDT 2011

digikey still has the FANxxxx in stock.

besides, now u know what the parts does and it's pinout. It won't be hard to
figure out and replicate it's function even with a different part.

On Tue, Jun 28, 2011 at 1:45 PM, Jean-Marc LeBlanc <
jeanmarc.leblanc at gmail.com> wrote:

> the part is FAN6520A it is the replacement part for the original
> rt9202 but I think both are now not being made
>
> Jean-Marc Le Blanc
> ---
>
> "Do you pine for the nice days of Minix-1.1, when men were men and
> wrote their own device drivers?" Linus Torvalds
>
>
>
>
> On Tue, Jun 28, 2011 at 1:42 PM, Andrew Plumb <andrew at plumb.org> wrote:
> > What's the part?  Often times there are pin-compatible replacements by
> the same manufacturer or third parties.
> >
> > Andrew.
> >
> > On 2011-06-28, at 1:40 PM, Jean-Marc LeBlanc wrote:
> >
> >> thank but i think I found the part on a website.  it seems though that
> >> the part is no longer being made.
> >>
> >> Jean-Marc Le Blanc
> >> ---
> >>
> >> "Do you pine for the nice days of Minix-1.1, when men were men and
> >> wrote their own device drivers?" Linus Torvalds
> >>
> >>
> >>
> >>
> >> On Tue, Jun 28, 2011 at 1:37 PM, Emil Mitev <quanttrom at gmail.com>
> wrote:
> >>> I have a wrt54gl. i am not sure if they changed the layout or the parts
> used
> >>> based on availability/price. I supposed I can check for you and see
> what I
> >>> have
> >>> Emil
> >>> On Tue, Jun 28, 2011 at 9:22 AM, Jean-Marc LeBlanc
> >>> <jeanmarc.leblanc at gmail.com> wrote:
> >>>>
> >>>> I can take a picture but It won't be much use.  I found this picture
> >>>> on line.  I don't really have a camera.  The problem is that the
> >>>> marking are all gone because the chip fried.  I am looking for some
> >>>> one with a linksys WTR54  router that can tell me what is written on
> >>>> the chip.  I am pretty sure its a voltage regulator or some sort.
> >>>>
> >>>> Jean-Marc Le Blanc
> >>>> ---
> >>>>
> >>>> "Do you pine for the nice days of Minix-1.1, when men were men and
> >>>> wrote their own device drivers?" Linus Torvalds
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> On Tue, Jun 28, 2011 at 9:14 AM, Andrew Plumb <andrew at plumb.org>
> wrote:
> >>>>> Given its location on the board it's probably power-management
> related,
> >>>>> but you'll have to take a *much* closer picture of the package
> markings.
> >>>>>
> >>>>> Here's an example of how close you need to get:
> >>>>>
> http://www.chipworks.com/media/wpmu/uploads/blogs.dir/4/files/2011/06/toshibaflash.jpg
> >>>>>
> >>>>> On 2011-06-28, at 9:02 AM, Jean-Marc LeBlanc wrote:
> >>>>>
> >>>>>> a better picture
> >>>>>>
> >>>>>>
> https://picasaweb.google.com/lh/photo/jr-mS5nko8Yo2oDjVB7r0A?feat=directlink
> >>>>>>
> >>>>>> Jean-Marc Le Blanc
> >>>>>> ---
> >>>>>>
> >>>>>> "Do you pine for the nice days of Minix-1.1, when men were men and
> >>>>>> wrote their own device drivers?" Linus Torvalds
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> On Mon, Jun 27, 2011 at 3:09 PM, Jean-Marc LeBlanc
> >>>>>> <jeanmarc.leblanc at gmail.com> wrote:
> >>>>>>> I found a low res picture and circled the part I am looking for
> >>>>>>>
> >>>>>>>
> https://picasaweb.google.com/lh/photo/IwUNo5lFdVAtdG0Vf4hncg?feat=directlink
> >>>>>>>
> >>>>>>> Jean-Marc Le Blanc
> >>>>>>> ---
> >>>>>>>
> >>>>>>> "Do you pine for the nice days of Minix-1.1, when men were men and
> >>>>>>> wrote their own device drivers?" Linus Torvalds
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> On Mon, Jun 27, 2011 at 3:04 PM, Tom Burns <tom.i.burns at gmail.com>
> >>>>>>> wrote:
> >>>>>>>> Ah, sorry, I understand now.  Good luck.
> >>>>>>>> Tom
> >>>>>>>>
> >>>>>>>> On Mon, Jun 27, 2011 at 3:03 PM, Jean-Marc LeBlanc
> >>>>>>>> <jeanmarc.leblanc at gmail.com> wrote:
> >>>>>>>>>
> >>>>>>>>> That is exacly what I am trying to get.  The chip fired and all I
> >>>>>>>>> can
> >>>>>>>>> make out on it is the first letter being A the rest is all smuged
> >>>>>>>>> when
> >>>>>>>>> the chip fried.  I am hopping some one my have a wrt 54G router
> >>>>>>>>> opened
> >>>>>>>>> and might be able to take a look
> >>>>>>>>>
> >>>>>>>>> Jean-Marc Le Blanc
> >>>>>>>>> ---
> >>>>>>>>>
> >>>>>>>>> "Do you pine for the nice days of Minix-1.1, when men were men
> and
> >>>>>>>>> wrote their own device drivers?" Linus Torvalds
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> On Mon, Jun 27, 2011 at 2:59 PM, Tom Burns <
> tom.i.burns at gmail.com>
> >>>>>>>>> wrote:
> >>>>>>>>>> Hi Jean-Marc
> >>>>>>>>>> You're going to need to post the model number that should be on
> the
> >>>>>>>>>> top
> >>>>>>>>>> of
> >>>>>>>>>> the chip.  the U6 is just a part reference to the schematic.
> >>>>>>>>>> Tom
> >>>>>>>>>> On Mon, Jun 27, 2011 at 2:57 PM, Jean-Marc LeBlanc
> >>>>>>>>>> <jeanmarc.leblanc at gmail.com> wrote:
> >>>>>>>>>>>
> >>>>>>>>>>> I have a wifi router that I over powered and fried a chip.  I
> am
> >>>>>>>>>>> hoping to be able to replace it and have it working.  I have a
> >>>>>>>>>>> lynksys
> >>>>>>>>>>> wtr 5G ( i am not 100% sure what model I think its 54g 1.0 I
> lost
> >>>>>>>>>>> the
> >>>>>>>>>>> enclosure)  I am looking for the part (neat the power plug) 8
> pin
> >>>>>>>>>>> label U6
> >>>>>>>>>>>
> >>>>>>>>>>> Jean-Marc Le Blanc
> >>>>>>>>>>> ---
> >>>>>>>>>>>
> >>>>>>>>>>> "Do you pine for the nice days of Minix-1.1, when men were men
> and
> >>>>>>>>>>> wrote their own device drivers?" Linus Torvalds
> >>>>>>>>>>>
> >>>>>>>>>>> _______________________________________________
> >>>>>>>>>>> Lab mailing list
> >>>>>>>>>>> Lab at artengine.ca
> >>>>>>>>>>> http://artengine.ca/mailman/listinfo/lab
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>
> >>>>>>
> >>>>>> _______________________________________________
> >>>>>> Lab mailing list
> >>>>>> Lab at artengine.ca
> >>>>>> http://artengine.ca/mailman/listinfo/lab
> >>>>>
> >>>>> --
> >>>>>
> >>>>> Makerbot Number Nine... #9... 0x09... 0o11... 0b1001...
> >>>>> http://clothbot.com/wiki/MakerBotNumberNine
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>
> >>>> _______________________________________________
> >>>> Lab mailing list
> >>>> Lab at artengine.ca
> >>>> http://artengine.ca/mailman/listinfo/lab
> >>>
> >>>
> >>
> >> _______________________________________________
> >> Lab mailing list
> >> Lab at artengine.ca
> >> http://artengine.ca/mailman/listinfo/lab
> >
> > --
> >
> > "The future is already here.  It's just not very evenly distributed" --
> William Gibson
> >
> > Me: http://clothbot.com/wiki/
> >
> >
> >
>
> _______________________________________________
> Lab mailing list
> Lab at artengine.ca
> http://artengine.ca/mailman/listinfo/lab
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://artengine.ca/pipermail/lab/attachments/20110628/2754fd16/attachment.htm>