[Lab] Need help Identifying a part

[Emil Mitev]

I have a wrt54gl. i am not sure if they changed the layout or the parts used
based on availability/price. I supposed I can check for you and see what I
have

Emil

On Tue, Jun 28, 2011 at 9:22 AM, Jean-Marc LeBlanc <
jeanmarc.leblanc at gmail.com> wrote:

> I can take a picture but It won't be much use.  I found this picture
> on line.  I don't really have a camera.  The problem is that the
> marking are all gone because the chip fried.  I am looking for some
> one with a linksys WTR54  router that can tell me what is written on
> the chip.  I am pretty sure its a voltage regulator or some sort.
>
> Jean-Marc Le Blanc
> ---
>
> "Do you pine for the nice days of Minix-1.1, when men were men and
> wrote their own device drivers?" Linus Torvalds
>
>
>
>
> On Tue, Jun 28, 2011 at 9:14 AM, Andrew Plumb <andrew at plumb.org> wrote:
> > Given its location on the board it's probably power-management related,
> but you'll have to take a *much* closer picture of the package markings.
> >
> > Here's an example of how close you need to get:
> http://www.chipworks.com/media/wpmu/uploads/blogs.dir/4/files/2011/06/toshibaflash.jpg
> >
> > On 2011-06-28, at 9:02 AM, Jean-Marc LeBlanc wrote:
> >
> >> a better picture
> >>
> https://picasaweb.google.com/lh/photo/jr-mS5nko8Yo2oDjVB7r0A?feat=directlink
> >>
> >> Jean-Marc Le Blanc
> >> ---
> >>
> >> "Do you pine for the nice days of Minix-1.1, when men were men and
> >> wrote their own device drivers?" Linus Torvalds
> >>
> >>
> >>
> >>
> >> On Mon, Jun 27, 2011 at 3:09 PM, Jean-Marc LeBlanc
> >> <jeanmarc.leblanc at gmail.com> wrote:
> >>> I found a low res picture and circled the part I am looking for
> >>>
> https://picasaweb.google.com/lh/photo/IwUNo5lFdVAtdG0Vf4hncg?feat=directlink
> >>>
> >>> Jean-Marc Le Blanc
> >>> ---
> >>>
> >>> "Do you pine for the nice days of Minix-1.1, when men were men and
> >>> wrote their own device drivers?" Linus Torvalds
> >>>
> >>>
> >>>
> >>>
> >>> On Mon, Jun 27, 2011 at 3:04 PM, Tom Burns <tom.i.burns at gmail.com>
> wrote:
> >>>> Ah, sorry, I understand now.  Good luck.
> >>>> Tom
> >>>>
> >>>> On Mon, Jun 27, 2011 at 3:03 PM, Jean-Marc LeBlanc
> >>>> <jeanmarc.leblanc at gmail.com> wrote:
> >>>>>
> >>>>> That is exacly what I am trying to get.  The chip fired and all I can
> >>>>> make out on it is the first letter being A the rest is all smuged
> when
> >>>>> the chip fried.  I am hopping some one my have a wrt 54G router
> opened
> >>>>> and might be able to take a look
> >>>>>
> >>>>> Jean-Marc Le Blanc
> >>>>> ---
> >>>>>
> >>>>> "Do you pine for the nice days of Minix-1.1, when men were men and
> >>>>> wrote their own device drivers?" Linus Torvalds
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>> On Mon, Jun 27, 2011 at 2:59 PM, Tom Burns <tom.i.burns at gmail.com>
> wrote:
> >>>>>> Hi Jean-Marc
> >>>>>> You're going to need to post the model number that should be on the
> top
> >>>>>> of
> >>>>>> the chip.  the U6 is just a part reference to the schematic.
> >>>>>> Tom
> >>>>>> On Mon, Jun 27, 2011 at 2:57 PM, Jean-Marc LeBlanc
> >>>>>> <jeanmarc.leblanc at gmail.com> wrote:
> >>>>>>>
> >>>>>>> I have a wifi router that I over powered and fried a chip.  I am
> >>>>>>> hoping to be able to replace it and have it working.  I have a
> lynksys
> >>>>>>> wtr 5G ( i am not 100% sure what model I think its 54g 1.0 I lost
> the
> >>>>>>> enclosure)  I am looking for the part (neat the power plug) 8 pin
> >>>>>>> label U6
> >>>>>>>
> >>>>>>> Jean-Marc Le Blanc
> >>>>>>> ---
> >>>>>>>
> >>>>>>> "Do you pine for the nice days of Minix-1.1, when men were men and
> >>>>>>> wrote their own device drivers?" Linus Torvalds
> >>>>>>>
> >>>>>>> _______________________________________________
> >>>>>>> Lab mailing list
> >>>>>>> Lab at artengine.ca
> >>>>>>> http://artengine.ca/mailman/listinfo/lab
> >>>>>>
> >>>>>>
> >>>>
> >>>>
> >>>
> >>
> >> _______________________________________________
> >> Lab mailing list
> >> Lab at artengine.ca
> >> http://artengine.ca/mailman/listinfo/lab
> >
> > --
> >
> > Makerbot Number Nine... #9... 0x09... 0o11... 0b1001...
> > http://clothbot.com/wiki/MakerBotNumberNine
> >
> >
> >
> >
>
> _______________________________________________
> Lab mailing list
> Lab at artengine.ca
> http://artengine.ca/mailman/listinfo/lab
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://artengine.ca/pipermail/lab/attachments/20110628/605e7e95/attachment.htm>