[Lab] Can you 3D print for me?

[Jean-Marc LeBlanc]

Thanks Paul/Andrea its much appreciated.

I have attached a google sketch up of what I was hopping to have or
similar.  the wheel does not seem to be as round as i would like.

the inner circle part is 5.5mm wide and 4mm high.  The rest are just
approximate  10 cm diameter wheel 1 cm thick (to put an elastic on it)
Let me know what you think.

I don;t really thin 10 cm will be too big.  I think the motors are
powerful enough.

Jean-Marc Le Blanc
---

"Do you pine for the nice days of Minix-1.1, when men were men and
wrote their own device drivers?" Linus Torvalds




On Mon, Apr 11, 2011 at 10:16 AM, Paul & Andrea Mumby
<themumbys at gmail.com> wrote:
> I am sure we could work something out. If you send me specs and measurements
> and perhaps a rough sketch i could likely do the design work too if you have
> trouble
>
> On 2011-04-11 9:48 AM, "Jean-Marc LeBlanc" <jeanmarc.leblanc at gmail.com>
> wrote:
>> Hi
>> I am building a robot for the ORE_bit life folower, I bought this
>> base, and the wheel a gear up a little too much I find and its a
>> little slow. So I though I could make bigger wheels.
>> Does any one think If i made a google sketch up of the wheels and pay
>> for the plastic, they could print some for me?
>>
>> I have never sketched any thing for 3d printing and have limited
>> experience with google sketch up though.
>>
>> Also I was thinking if this works well maybe I could print a custom
>> frame for it?
>>
>> thanks,
>> Jean-Marc Le Blanc
>> ---
>>
>> "Do you pine for the nice days of Minix-1.1, when men were men and
>> wrote their own device drivers?" Linus Torvalds
>>
>> _______________________________________________
>> Lab mailing list
>> Lab at artengine.ca
>> http://artengine.ca/mailman/listinfo/lab
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 10cmWheel.skb
Type: application/octet-stream
Size: 31435 bytes
Desc: not available
URL: <http://artengine.ca/pipermail/lab/attachments/20110413/41e94b62/attachment-0001.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 10cmWheel.skp
Type: application/x-koan
Size: 32403 bytes
Desc: not available
URL: <http://artengine.ca/pipermail/lab/attachments/20110413/41e94b62/attachment-0001.skp>