[Lab] Laser machine fumes

Darcy Whyte darcy at siteware.com
Thu Sep 22 10:35:35 EDT 2011


I was feeling kinda funny myself. It's hard to say exactly what the cause
was but fumes is a good theory.

I wonder if it's worth having a time when the machine is closer to the
outdoors so the stuff can be vented outside.

Hmmm, I noticed that if you go out the artengine door and then through the
door directly in front, there is a window to the outside. I wonder if that
could be an asset....




Toward the end of that evening I was feeling side-effects of the acrylic
> cutting so it's definitely one of the "cut with door open" materials.
>
> How about a default rule along the lines of "Plain wood and paper products
> with no surface glues or adhesives are permitted.  All other materials must
> be authorized by ArtEngine before use with the laser."
>
> That way Ryan and Britta can add materials and associated vector and raster
> settings into our wiki and build up a set of Printer Preference Presets to
> load as required.
>
> Aside:  Anyone know where I can get good quality, flat 24"x12" (or
> size-multiples to cut down) sheets of 3mm or 1/8" thick wood (maple, birch,
> etc.) locally?  I want to do a proper wood-cut of the 8-bit violin that I
> did last night in cardboard.
>
> Andrew.
>
> On 2011-09-22, at 10:10 AM, Darcy Whyte wrote:
> > It says all that in the manual. In fact vinyl will wreck the laser.
> >
> > We already tried acrylic. It's not too bad with the filter we have.
> >
> >
> > On Thu, Sep 22, 2011 at 10:06 AM, Michael Ayukawa <
> mike.ayukawa at gmail.com> wrote:
> > Hi,
> > I've been warned that cutting plastics on a laser engraver REALLY stinks!
>  I wonder if we should do some sort of test before we kill everyone in the
> lab.
> > Also, we do need to ban PVC (produces hydrochloric acid byproduct that is
> both bad for machine and probably the mice in the lab).
> > Some facilities have banned any plastic cutting altogether.  Any
> volunteers to run a test?
> > /Mike
> >
> > http://fab.cba.mit.edu/content/tools/machines/universal_laser/
> >
> >
> > _______________________________________________
> > Lab mailing list
> > Lab at artengine.ca
> > http://artengine.ca/mailman/listinfo/lab
> >
> >
> > _______________________________________________
> > Lab mailing list
> > Lab at artengine.ca
> > http://artengine.ca/mailman/listinfo/lab
>
> --
>
> "The future is already here.  It's just not very evenly distributed" --
> William Gibson
>
> Me: http://clothbot.com/wiki/
>
>
> _______________________________________________
> Lab mailing list
> Lab at artengine.ca
> http://artengine.ca/mailman/listinfo/lab
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://artengine.ca/pipermail/lab/attachments/20110922/129f3b12/attachment.htm>


More information about the Lab mailing list