Difference between revisions of "Laser Cutting Resources"

From Mod Lab
Jump to: navigation, search
(WiFi Network in M76 Lab)
Line 7: Line 7:
  
 
The laser cutter is at IP address '''192.168.1.2''' (reserved).
 
The laser cutter is at IP address '''192.168.1.2''' (reserved).
 +
 +
The Epilog printer driver can be downloaded from https://www.epiloglaser.com/tech-support/zing-drivers.htm
  
 
== Using the Epilog Zing ==
 
== Using the Epilog Zing ==

Revision as of 20:44, 5 January 2015

This page is an index to various internal and external laser cutting resources.

WiFi Network in M76 Lab

You can connect your laptop directly to the Epilog Laser Cutter. Use the WiFI access point Art Engine M76 Lab (WPA-PSK key c1rcu1tM76). Alternatively, you can connect using the grey Ethernet cable.

The laser cutter is at IP address 192.168.1.2 (reserved).

The Epilog printer driver can be downloaded from https://www.epiloglaser.com/tech-support/zing-drivers.htm

Using the Epilog Zing

Applications

  • PCB Etching [1]

Sample Projects

Description Photo CAD File
Acrylic Coin Acrylic loonie.jpg SVG File