From Mod Lab
Revision as of 11:30, 12 November 2014 by Janick Bergeron
Settings for ModLab's Epilog Zing laser cutter, for various materials and thicknesses.
If your material is not listed here, see the Epilog Settings Whitepaper for advice on how to identify the proper settings.
|Acrylic||Clear||3mm||Cutting||100%||45%||5000Hz||Keep protective film on underside to protect surface from laser bed.|
|n/a||Etching||50%||50%||500 DPI||Use "Stucki" rasterization|