Epilog Settings

From Mod Lab
Revision as of 10:04, 12 November 2014 by Janick Bergeron (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Settings for ModLab's Epilog Zing laser cutter, for various materials and thicknesses.

If your material is not listed here, see the Epilog Settings Whitepaper for advice on how to identify the proper settings.

(awaiting table support for proper formatting) Material | Color | Thickness | Job | DPI | Power | Speed | Frequency | Notes

Acrylic | Clear | 3mm | Cutting | - | 100% | 45% | 5000Hz |

" | " | - | Etching | 500 | 50% | 50% | - | Use "Stucki" rasterization